پایگاه خبری تحلیلی صنعت و تاسیسات

 دکتر حسینعلی پور استاد دانشگاه علم و صنعت تهران است که در حوزه صنعت و تاسیسات فعال است. ایشان دبیر سمینار توسعه پایدار هستند که هر ساله در دانشگاه علم و صنعت و با مشارکت شرکت های تاسیساتی برگزار می شود.

افتخارات

• Top 5% Students (B. Sc. Sharif University, Iran, 1985)
• University Dean’s Honors List (Ph.D., Mc Gill University, Canada, 1996)
• Outstanding Student (M. Sc. Tarbiat Modaress University, Iran 1989)

 

 

تجربیات

• Director of Computational Fluid Dynamics Research Lab, Iran University of Science and Technology, (2001-2011)
• Director of Thermal Machines Laboratory (2002 – ۲۰۱۱)
• Member of Canadian CFD Society
• Member of Vacuum Society
• Head of Thermo-fluid group, Mechanical Eng. Dept., Iran University of Science and Technology (2000 – ۲۰۰۲)
• Member of Iran Society of Combustion
• Member of Iran Society of Mechanical Engineers
• Member of Iran Society of Aerospace
• Member of Research Committy  of Tehran Provenice Gas Company (2007-2011)
• Member of Research Committy  of National Iranian Gas Company (2007-2011)
• Member of Research Committy  of Engineering and Development Gas Company (۲۰۰۸-۲۰۱۱)
• Head of Engineering research Committy of Iranian Oil Distribution Company (2008-2011)
• Head of CNG research Committy of  National Iranian Oil Products Distribution Company (2010-2011)
• Research Centre of Power Ministry, Advisor (1997- 2004)
• Industrial Research Institute, Head of Engine Design Department, (1986-1990)

 

 زمینه های فعالیت

– صنعت نفت و گاز

– نیروگاه

– سیستم های تبدیل انرژی در آب و محیط زیست

زمینه های تحقیقاتی

• سیستم های تولید و تبدیل انرژی
• سیستم های تولید قدرت مکانیکی و جلوبرندگی
• سیستم های فرآیندی مواد غذایی

  اختراعات ثبت شده

• “میکسر مخزنی آشوبناک دو پره ای برای سیالات با لزجت بالا ” – شماره ثبت : ۷۲۹۸۸

 

کتاب

Hosseinalipour, S.M. and Arun S. Mujumdar, “A Model for Superheated Steam Drying of Particles in an Impinging Stream Dryer”, Thermal Fluids Group, Department of Chemical Engineering, McGill University, Montreal, Canada, section IV, page 537-574 of ” Mathematical Modeling and Numerical Techniques in Drying Technology” , MARCEL DEKKER, INC., New York, 1997.

مقالات ژورنال ( در حال به روز رسانی)

• Payam Rahim Mashaei, Seyed Mostafa Hosseinalipour, and Mehdi Bahiraei, “Numerical Investigation of Nanofluid Forced Convection in Channels with Discrete Heat Sources,” Journal of Applied Mathematics, vol. 2012, Article ID 259284, 18 pages, 2012. doi:10.1155/2012/259284.
• S.M. Hosseinalipour, A. Tohidi, M. Shokrpour, “A review of dough rheological models used in numerical applications”, Journal of Computational and Applied Research in Mechanical Engineering ( JCARME ), Vol. 1, No.2, March 2012.
• M. Barzegar, Sh. Bishesari, S.M. Hosseinalipour, K. Sedighi, “Transient analysis of counterflowing jet over highly blunt cone in hypersonic flow”, Acta Astronautica, December 2011.
• Hosseinalipour, S.M., Aghakhani, H., ” Numerical & Experimental Study of Flow from a Leaking Buried Pipe in an Unsaturated Porous Media”, Academy of Science, Engineering and Technology, 2011.
• Hosseinalipour, S.M., Mehrpanahi, A., “The Investigation of the Effect of Repowering Options on Electricity Generating Cost for Iran Steam Power Plants”, International Journal of Sustainable Energy, 2011.
•  Hosseinalipour, S.M., Askari, H., Baghsheikhi, M., Jazayeri, S.A., ” Effect of Octane Number of PRF in Homogeneous Charge Compression Ignition (HCCI) Combustion”, International Journal of Automative Engineering, 2011. 
•  Shafaghat, R., Hosseinalipour, S.M., Lashgari, I., Vahedgermi, A., “Shape Optimization of axisymmetric cavitators in supercavitating flows, using the NSGA II algorithm”, Applied Ocean Research, doi:10.1016/j.apor.2011.03.001, 2011.
• Movahednejad, E., Ommi, F., Hosseinalipor, S.M., Chen, C. P., Mahdavi, S.A.,”Application of maximum entropy method for droplet size distribution prediction using instability analysis of liquid sheet”, Heat and Mass Transfer,Vol. 47, Issue 12, pp. 1591-1600, doi 10.1007/s00231-011-0797-5, 2011.
• Movahednejad, E., Ommi, F. and Hosseinalipour, S.M. “Prediction of Droplet Size and Velocity in Droplet Formation Region of Liquid Spray”, Journal of Entropy, June 2010.
• Barzegar. M, Hosseinalipour S.M.,”Numerical Simulation Of Hypersonic Flow Over Highly Blunted Cones With Spike”, Acta Austronica, Vol. 67, pp. 180-193, 2010.
• Ommi, F., Hosseinalipour, S.M., Kargar, A., Movahed, E., Nekofar, K., ” Experimental Investigation of Characteristics of a Double-Base Swirl Injector In a Liquid Rocket Propellant Engine”, 2009.
• Shafaghat. R, Hosseinalipour S.M., Nouri. N. M, Vahedgerami. A.,”Mathematical Approach To Investigate The Behaviour Of The Principal Parameters In Axisymetric Supercavitaiting Flows Using Boundary Element Method”, Journal Of Mechanics, Vol. 25, pp. 465-473, 2009.
• Shafaghat, R., Hosseinalipour, S.M., Derakhshani, S.M.E., “Derivation of a Correlation for Drag Coefficient in Two Dimensional Bounded Supercavitating Flows, Using Artifitial Neural Networks”, Archive of Applied Mechanics, June 2009.
• Roustapour. O. R, Hosseinalipour S.M., Ghobadian. B, Mohaghegh. F, Maftoon Azad. N, “A Proposed Numerical-Experimental Method For Drying Kinetics In A Spray Dryer”, Journal Of Food Engineering, Vol. 90, pp. 20-26, 2009.
• Banooni. S, Hosseinalipour S.M., Mujumdar. A.S, Taherkhani. P, Bahiraei. M, “Baking Of Flat Bread In An Impingement Oven: Modeling And Optimization”, Drying Technology, Vol. 27, pp. 103-112, 2009.
• Banooni. S, Hosseinalipour S.M., Mujumdar. A.S, Taheran. E, Bahiraei. M, Taherkhani. P, “Baking Of Flat Bread In An Impingement Oven: An Experimental Study Of Heat Transfer And Quality Aspects”, Drying Technology, Vol. 26, pp. 902-909, 2008.
• Banooni. S, Hosseinalipour S.M., Mujumdar. A.S, Taheran. E, Mashaiekhi. M, “Impingement Heat Transfer Effects On Baking Of Flat Bread”, Drying Technology, Vol. 26, pp. 910-919, 2008.
• Shafaghat. R , Hosseinalipour. S.M., Nouri. N.M, Lashgari. I, “Shape Optimization Of Two-Dimensional Cavitators In Supercavitating Flows Using NSGA II Algorithm”, Applied Ocean Research , Vol. 30, pp. 305-310, 2008.
• Pak. A , Mohammadi. T , Hosseinalipour. S.M., Allahdini. V, ” CFD Modeling Of Porous Membranes “, Journal Of Desalination , Vol. 222, pp. 482-488, 2008.
• Doustdar. M. M , Hosseinalipour. S.M., Ghobadian. B, “An Experimental Investigation Of Lime Juice Driving In A Pilot Plant Spray Dryer” Journal Of Dispersion Science And Technology, Vol. 2, pp. 181-188, 2006. m
• Doustdar. M. M, Mazaheri. K, Hosseinalipour. S. M. , “Computational Analysis Of Injection –Velocity Effects On Dynamic Parameters Of Unconfined Fuel – Vapor Clouds”, Combustion, Explosion, And Shock Waves, Vol. 11, No. 5, pp. 510-520, 2005.
• Hosseinalipour. S. M , Amoli. A, “A Continuum Model For Pumping Performance Of Turbo Molecular Pumps In All Flow Regimes” Vacuum 75, pp. 361 – ۳۶۶, ۲۰۰۴٫
• Hoseinalipour, S. M., Amoli, A. and Ebrahimi, R. ., “Direct Simulation of Free Molecular Flow in Fully 3-D Axial Rotor”, Journal of Thermophysics and Heat Transfer, Vol. 18, No. 1, January- March 2004.
• Amoli, A., Ebrahimi R., and Hoseinalipour, S. M. “Some Features of Molecular Flow in a Rotor-Stator Row with Real Topology”, Journal of Vacuum, Vol. 10, No. 2, 2003.
• Hosseinalipour, S.M., Mujumdar, AS.,”Flow and Thermal characteristics of Steady two Dimensional Confined Laminar Opposing Jets .1. Equal Jets”, International Communications in Heat and Mass Transfer. 24(1):27-38, 1997.
• Hosseinalipour, S.M., Mujumdar, AS.,”Comparative Evaluation of Different Turbulence Models for Confined Impingigng and Opposing Jet Flows”, Numerical Heat Transfer part A-Applications. 28(6):647-666, 1995.
• hosseinalipour, “parametric study of fuel vapor concentration distribution due to vaporization of fuel droplets in free atmosphere”, iranian journal of mechanical engineering transactions of the isme
• hosseinalipour,” Experimental investigation of characteristics of a Double-Base Swirl injector in liquid Rocket propellant engine”,the pacific journal of science and technology
• hosseinalipour,”Effect of Hydrogen Addition to Natural Gas on Homogeneous Charge Compression Ignition Combustion Engines Performance and Emissions Using a Thermodynamic Simulation”,International journal of Automotive Engineering – ISAE
• hosseinalipour,”Effect of different electric load strategies on micro CHPs for buildings “, Int. J. of energy and technology
• hosseinalipour,” 3D numerical simulation of nanofluid laminar forced convection in a channel with localized heating”,Australian J. of Basic and Applied Sciences
• hosseinalipour, ” Introduction of a Chaotic Dough Mixer, Part B: Chaotic Behavior and Mixing Performancee”, Life Science J.
• hosseinalipour , ” Evaluation of a cooling performance of a typical full loaded cool storage using mono-scale CFD simulation”, Modern Applied Science
• hosseinalipour , ” ESTIMATION OF THE BREAK UP LENGTH FOR THE ANNULAR AND THE ROUND LIQUID JET USINGLINEAR INSTABILITY ANALYSIS “, IJST, Transactions of Mechanical Engineering
• hosseinalipour , ” Numerical Investigation of Thermal Mixing of Shear Thinning Fluids in One-Way Opposing Jets “, JCARME
• hosseinalipour , ” Introduction of a Chaotic Dough Mixer, Part A: Mathematical Modeling and Numerical Simulation ” , JOURNAL of Mechanical science and Technology
• hosseinalipour , ” Static and dynamic mathematical modeling of a Micro Gas Turbine” , Journal of Mechanics,
• hosseinalipour, ” Thermal Dispersion Model Compared with Euler-Lagrange Approach in Simulation of Convective Heat Transfer for Nano particle Suspensions  ” J. of Dispersion and Technology,2013
• hosseinalipour,”Using Neural Network for Determination of Viscosity of Water-Tio2 Nanofluid” , Advances in Mechanical Engineering,2012
• hosseinalipour,”Numerical Simulation of Flow and Thermal Characteristics of Harmonic Pulsed Impinging Streams ” , Asia-Pacific J. of Chemical Engineering,2012
• hosseinalipour ,” Experimental study on chaotic mixing created by a new type of mixer with rotational blades “, Advances in Mechanical Engineering , 2012
• hosseinalipour ,” Transient Analysis of Counterflowing Jet Over Highly Blunt Cone in Hypersonic Flows ” , Acta Austronutica , 2011
• hosseinalipour,” Determination of supercavity shape forn axisymmetric cavitators at different nan-zero attack angels, using BEM “, J. of Mechanics
• hosseinalipour,”Heat Transfer and Flow Characteristics of Nanofluid in a Narrow Annulus: Numerical Study, Modeling and Optimization”,Canadian J. of Chemical Engineering,2012
• hosseinalipour,”Simulation of Drying Charactristics of Evaporation from a Wet Particle in a Turbulent Pulsed Opposing Jet Contactor”, Drying Technology,2013
• hosseinalipour,”Introduction of a Chaotic Dough Mixer, Part A: Mathematical Modeling and Numerical Simulation”,J. of Mechanical Sience and Technology , 2013
• hosseinalipour,”Heat Tranfer and Flow Charactristics of Nanofluid in a Narrow Annulus: Numerical Study, Modelling and Optimization”, Canadian J. of Chemical Engineering , 2014
• hosseinalipour ,” Numerical Study and Optimization of Hydrothermal Charactristics of Mn-Zn Ferrite Nanofluid Within Annulus in the Presence of Magnetic Field”,J. of Superconductivity and Novel Magnetism , 2014
• hosseinalipour , ” Laminar Forced Convection of a Water TiO2 Nanofluid in Annuli Considering Mass Conversion for Particles ” , Chemical Engineering and Technology , 2013
• hosseinalipour ,” Chaotic advection induced heat transfer enhancement in a chevron-type plate heat exchanger”, Heat and Mass Transfer , 2013
• hosseinalipour,”Experimental investigation of mixing in a novel continuous chaotic mixer”, Korean J. Chem. Eng , 2014
• hosseinalipour,”Numerical Simulation of Flow and Thermal Charactristics of Harmonic Pulsed Laminar Impinging Streams”, Asia-Pacific J. of Chemical Engineering,2012
• hosseinalipour,”Thermal Dispersion Model Compared with Euler-Lagrange Approach in Simulation of Convective Heat Transfer for Nanoparticle Suspensions”,Journal of Dispersion Science and Technology , 2013
• hosseinalipour,” Particle migration in nanofluids considering thermophoresis and its effect on convective heat transfer”, Thermochimica Acta , 2013
• hosseinalipour,” Computer Simulation of Performance of Flameless Catalytic Burners ,” Jokull , 2013
• hosseinalipour,” Determination of supercavity shape for axisymmetric cavitators at different non-zero attack angels. Using boundary element method”, Journal of mechanics , 2012
• hosseinalipour,” A comprehensive review on different numerical approaches for simulation in nanofluids: traditional and novel tecniques “, J Disper sci technol , 2014
• hosseinalipour,” Proposed numerical-experimental method for drying kinetics in a spray  dryer “, Journal of food engineering , 2009
• hosseinalipour,” Effects of Various Forces on Particle Distribution and Thermal Features of Suspensions Containing Alumina Nanoparticles “, Journal of Dispersion Science and Technology , 2014
• hosseinalipour,”DETERMINATION OF SUPERCAVITY SHAPE FOR AXISYMMETRIC CAVITATORS AT DIFFERENT NON-ZERO ATTACK ANGLES, USING BOUNDARY ELEMENT METHOD “,Journal of Mechanics , 2012
• hosseinalipour,”The impact of nanoparticles on forced convection in a serpentine microchanel “, Transport phenomena in nano and micro scales ,2014
• hosseinalipour,”Dynamical study of pulsed impinigig jet with time vary heat flux boundary condition”,Heat transfer-Asia Reaserch
• hosseinalipour,” Numerical simulation of flow and thermal characteristics of harmonic pulsed laminar impinging streams “, Asia Pacific Journal Chemical Engineering,2013
• hosseinalipour,”Mathematical approach to investigat the behavior of the principal parmeters in axis mmetric supercavitating flows, using boundary element method” , Journal of mechanics ,2009
•  استفاده از شبکه عصبی مصنوعی برای شناسائی خواص ترمودینامیکی محلول لیتیوم بروماید-آب , مجله علمی پژوهشی امیر کبیر, ۱۳۸۹
•  بررسی اقتصادی باز توانی نیروگاههای بخار در مقایسه با احداث نیروگاههای گازی , انرژی ایران , ۱۳۸۸
•  مطالعه تجربی مشخصات اسپری یک نوع صفحه انژکتور موتور موشک سوخت مایع با استفاده از نتایج تست سرد , فصلنامه علمی پژوهشی علوم و فناوری فضائی , ۱۳۸۹
• تحلیل گرما پویایی روند تغیرات زاویه گشودگی سامانه زمان بندی پیوسته دریچه های موتور ملی , امیر کبیر, ۱۳۸۹
• اختلاط آشوبناک سیالات بسیار ازج به کمک نوع جدیدی از مخلوط کن پیوسته, نشریه مهندسی شیمی ایران , ۱۳۹۳
• بررسی اثر انجام بازتوانی کامل بر ارتقاء خصوصیات فنی – اقتصادی یک نیروگاه بخار , مهندسی مکانیک مدرس , ۱۳۹۰
• تحلیل ترمو اکونومیک روشهای موجود در انجام باز توانی گرمایش آب تغذیه به روش بیمایشی , فصلنامه مکانیک هوا فضا , ۱۳۹۱
• بررسی و مدلسازی رفتار گذرای خط لوله در شبکه انتقال گاز, ماهنامه نفت و گاز و پتروشیمی , ۱۳۸۷